Installation Guide: The Best OEM-Fit MagSafe Phone Mount for MINI Cooper R55–R59

For: MINI Cooper R55, R56, R57, R58, R59 (LHD only)

Installing your MINI Cooper R-Series MagSafe Dashboard Mount is fast, clean, and fully reversible. With no screws or adhesives required, this mount blends OEM fitment with modern MagSafe functionality.

What You’ll Need:

- Included hook/pry tool (provided in box)
- A few minutes of patience — no screws or drilling

Step-by-Step Instructions

Step 1 – Open the storage compartments

Start by opening both the upper and lower storage lids in the center dashboard area. This will give you the clearance needed for the next steps.

Step 2 – Pry open the center trim panel

Use the included hook tool to gently pry open the plastic cover located below the AC vents. Work from the sides, taking care not to scratch the edges.

Step 3 – Insert the mount from the top

Slide the mount in from above, carefully hooking the top section onto the inner dashboard panel. Make sure it grips tightly — it should not rattle.

Step 4 – Lock in the lower section

Once the top is secure, press the bottom part of the mount into place. It should lock onto the lower edge of the trim for a snug, OEM-style fit.

Step 5 – You’re done!

That’s it — your MagSafe dashboard mount is now installed. It should feel solid, sit flush with the trim, and hold your phone securely for daily use.

Removing the Mount (Optional)

If you need to disassemble:
1. Reopen the two center storage lids.
2. Use the hook tool to pry off the bottom section first.
3. Then remove the top section.
4. Be sure to remove the A/C trim panel as in Step 2.

Fitment & Compatibility:

- MINI Cooper R55, R56, R57, R58, R59 (LHD)
- Compatible with MagSafe-equipped iPhones and cases
- No interference with AC, radio, or storage compartments
- Reversible and clean install — no screws, adhesives, or damage

Haven’t ordered yet?

If you’re reading this before purchasing — you’re in the right place.

This is the most OEM-fitting MagSafe phone mount available for MINI Cooper R55–R59.

- No drilling, no wobble, no compromise
- Designed specifically for MINI’s dash architecture
- MagSafe compatible and clean enough to look factory

👉 Order yours now at OneMiniBite.com